Setting up your Clover Go 3 Dock
The Clover Go 3 Dock is the countertop stand Arca provides for the Clover Go 3 card reader — it holds and charges your reader so it's always ready at the register. This guide covers assembling the dock, seating your reader, connecting power, and optional ways to secure it to the counter.
What's in the box
- Go 3 Dock (model K600) — the base and cradle, plus the securing screw.
- Adhesive strip — for sticking the dock to a countertop (optional).
Set it up in 4 steps
Assemble the dock
Attach the cradle (the top piece) onto the dock base until it clicks into place.
Dock your reader
Place your Clover Go 3 card reader into the cradle so it seats on the charging contacts.
Tighten the screw
Tighten the screw underneath to lock the cradle to the base.
Connect power
Plug a USB cable into the dock's power port, then into a power adapter and outlet (USB cable not included).
Secure your dock (optional)
If you want the dock fixed in place, you have three options:
- Screw it down. Fasten the dock to the counter with M4 or #8 Pan Head screws (screws not included).
- Stick it down. Clean the surface, then press and hold the adhesive strip in place for 10 seconds.
- Lock it. Run a security cable through the dock to tether it to the counter.
Care & safety
- Use a standard USB cable and adapter to power the dock.
- Keep it dry and clean it with a dry cloth only.
- Don't disassemble or modify the dock.
Good to know
| Detail | Value |
|---|---|
| Device | Clover Go 3 Dock (model K600) |
| Works with | Clover Go 3 card reader |
| Power | USB cable (not included) + power adapter |
| Mounting | M4 or #8 Pan Head screws, adhesive strip, or a security cable |
Still need help?
If your Go 3 won't charge in the dock or the dock won't power on, contact Arca support and include:
- The device — Clover Go 3 Dock (model K600)
- Whether the reader charges when docked, and the cable/adapter you're using
- What's happening and the step you're stuck on (a photo helps)